SCH Hole Holding in in stainless Steel
SCH0312-3S
This Spanclamps Part # SCH0312-3S is a Hole Holding in in stainless steel. This is to be used without receptacle
Technical information
Weight (g)
88
Heatresistant temperature
180 °C
Shear strength*
400 N
Tensile strength*
300 N
Clamping force
6 N
Material Info.
Body/Button
303 Stainless steel
Spacer
303 Stainless steel
Spring/Snap Ring
304 Stainless steelWPB Stainless steel
Measurments
Plate thickness
3-12 mm
Base plate thickness
3 mm
D
8,5
M
M16x1 (Fine Thread)
D1
32
D2
10
H
51
L
16,5
H1
41,5
L1
6,5
L2
11
.jpg)
SpanClamps Part No SCH0312-3S is factory new.
SpanClamps Part No SCH0312-3S has a certificate of Quality, and certificate of Conformity.
Maximum dynamic loads are currently set at 1/4th of the static loads, this needs to be life tested in the customer application.*Shear & Tensile Strength are static loads. Fastener will break when it receives this load. When the two plates receive a tensile load bigger than the fastener's clamping force, there will be a gap between the plates.