href="https://statcounter.com/" target="_blank"> class="statcounter"
src="https://c.statcounter.com/11977585/0/672b2e1c/1/"
alt="Web Analytics">

REQUEST A QUOTE DOWNLOAD CATALOGUE CONTACT US

SCISQT Snap-In Quarter Turn with stainless Steel wing head

SCSIQT0614-S

This Spanclamps Part # SCSIQT0614-S is a Snap-In Quarter Turn with stainless steel wing head. This clamp has a stainless steel knob head and bears indications showing if the clamp is open or closed. The clamp is furnished with 3 socket head cap installation screws of M2x0,4 - 5 mm. The receptacles that can be used with this clamp are

Recommended Pin


Technical information


Weight (g)
105
Heatresistant temperature
200 °C
Shear strength*
1800 N
Tensile strength*
400 N
Clamping force
9 N

Material Info.


Body/shank
303 Stainless steel
Ball
440C Stainless steel - Quenched end tempered
Knob
SCS13 stainless steel (Equivalent to 304)
Spring
304 Stainless steelWPB Stainless steel

REQUEST A QUOTE     DOWNLOAD CATALOGUE

Measurments


Plate thickness
3-14 mm
D (+ 0,04 / + 0,02)
8
D1 (h9)
18
D2
34
D3
34
DP
28
H
28
H1
10
M
M3x0,5 - 4 mm deep

SpanClamps Part No SCSIQT0614-S is factory new.
SpanClamps Part No SCSIQT0614-S has a certificate of Quality, and certificate of Conformity.



Maximum dynamic loads are currently set at 1/4th of the static loads, this needs to be life tested in the customer application.*Shear & Tensile Strength are static loads. Fastener will break when it receives this load. When the two plates receive a tensile load bigger than the fastener's clamping force, there will be a gap between the plates.